AR SRC Sights

The Windham Weaponry "SRC"

The Windham Weaponry “SRC”

When I purchased my Windham Weaponry “SRC” a set of open sights had to be chosen for the firearm. I went through several sets and sight combinations before selecting a sight set that would work with the gas bock and which I could also use to co-witness an optic. (Note that it is not recommended to run a polymer front sight on the gas block.)

I recently received a newsletter from Windham Weaponry that contained an article regarding sights for the “SRC” AR and, with their permission, I am glad to pass this information along to you.

When choosing iron sights for SRC (Sight Ready Carbine) AR15s, it is important to make sure you get the correct height front sight. Most manufacturers of rail mounted iron sights make two different heights for the front sight. With the SRC (and other Sight Ready style carbines/rifles) you have to make sure you get a front sight that is for “same plane” sighting. In other words it has to be the same height as the rear sight that is mounted to the picatinny rail on the upper. Some confusion comes in here when you see a company that offers a “Gas block height detachable front sight”. Right now Windham Weaponry is the only manufacturer that makes an AR15 in which the picatinny rail on the gas block is on the same plane as the upper receiver. Most company’s gas blocks have rails that are lower than the rail on the upper. Front sights for these rifles have to be made taller to make up this difference in height. So what happens if you mount one of these taller front sights on an SRC is your rifle will end up shooting way too low, and you cannot move the front sight post down far enough to get the gun on target.

Below is approximately what the measurement is supposed to be for the front and rear sights. Note that is has to be the same or at least close to this measurement for both sights.

Rear sight, approximately 1.440" from top of rail to aperture

Rear sight, approximately 1.440″ from top of rail to aperture

.

Front sight, approximately 1.440" from top of rail to top of front sight post

Front sight, approximately 1.440″ from top of rail to top of front sight post

Thanks to Windham Weaponry for permission to pass on this article (with minor changes for fluidity of content and formatting for this article) that came with Windham Weaponry’s newsletter.

Be sure to visit the Windham Weaponry, Inc. website at http://www.windhamweaponry.com/#axzz4CVWn9zEQ for product information.

Note that I am not a paid spokesperson for Windham Weaponry. I am just a satisfied customer.

Loading

About Taurian

Taurian is a U.S. Army veteran and former LEO and Defensive Tactics Instructor. Taurian also has over fifty years of experience as a Technical Writer and Training Program Developer. After leaving home at the age of ten without any shoes, Taurian continues on with many years devoted to the keeping and bearing of arms.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.